Invacare Mobility Aid 1069956 User Manual

MPR Tray Assem bly Kit - Model 6905A

Assembly, Installation and Operating Instructions

Kit No. 1108705, 1069956

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact

Carrier/Dealer for further instruction.

SA FETY SUMMA RY

To ensure the safe installation, operation and use of the MPR Tray Assem bly

Kit, these instructions MUST be followed:

GEN ERA L WA RN IN G

DO NOT install or use this equipment without first reading and understanding

these instructions. If you are unable to understand the W arnings, Cautions or

Instructions, contact a healthcare professional, dealer or technical personnel before

attempting to install this equipment - otherwise injury or damage may occur.

IN STA LLA TION WA RN IN G

After ANY adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely - otherwise injury or damage may occur.

MPR Tray Assembly Kit (Part No. 1108705) contains the following items:

DESCRIPTION

QUANTITY

Tray*

Pivot Arm

Support Arm

Tray Tab

Flange Screw

Dome Plug

*Tray (Part No. 1069956) can also be ordered separately.

REPLA CIN G TH E TRA Y - MODEL 6 9 0 5 A (FIGURE 1 )

1. Remove tray from recliner. Refer to STORING/REMOVING THE TRAY in the

Owner’s Manual, part number 54000M107.

2. Position tray assembly on the floor as shown in FIGURE 1.

3. Remove the four (4) flange screws and two (2) tray tabs that secure the support arm

to the tray.

4. Remove the four (4) flange screws and two (2) tray tabs that secure the pivot arm to

the tray.

5. Remove existing tray.

NOTE: Retain ALL mounting hardware and arms if only installing new Tray, part number 1069956.

For m ore inform ation regarding Invacare products, parts, and services,

Part No. 1123847

MPR Tray Assem bly Kit